acpi4asus

h1. Asus-laptop Supported Hardware

{{>toc}}

h2. Matrix

In the table below, "Kill switch" designates the radio switch present at the front of some models to completely disable WLAN/Bluetooth.

The SFUN value can be obtained by doing @cat /sys/devices/platform/asus-laptop/infos@ in a terminal.

|_.Model|_.LEDs|_.WLAN|_.Bluetooth|_.WIMAW|._WWAN (3g)|_.Backlight|_.LCD on/off|_.Light sensor|_.GPS|_.Keyboard Backlight|_.Kill switch|_.[[asus-laptop HWRS|HWRS]]|_.[[asus-laptop SFUN|SFUN]]|

|A6JC|mled|y|y|n/a|n/a|y|y|n/a|n/a|n/a|||0x248f7|

|F3JC|n/a|y|y|n/a|n/a|y|y|n/a|n/a|n/a|present|0x583|0xa18f7|

|M50Sv|mled|y|y|n/a|n/a|y|y|y|n/a|n/a||||

|A6Tc|mled|y|y|n/a|n/a|y|y|n/a|n/a|n/a|||0x20af7|

|G71GX|mled tled|y|y|n/a|n/a|y|y|n|?|?|||0xa1af7|

|X50R|n/a|y|y|n/a|n/a|y|y|n/a|n/a|n/a|||0x200f7|

|V1J|mled wled|y|y|n/a|n/a|y|y|n/a|n/a|n/a||||

|V6V|tled|y|y|n/a|n/a|y|y|n/a|n/a|n/a||||

|M50Vn|tled mled wlan?|y|y|n/a|n/a|y|y|y?|n/a|n/a|present||0x1a38f7|

|UL30A-QX328V|wlan|y|y|y|y|y|y|n/a|n/a|n/a|||0x1a08f7|

h2. Details

h3. A6JC

h3. N80VN

Dsdt: "1 (unknown bios version) ":http://dev.iksaif.net/attachments/download/2/eeepc_1000h_x.dsl.gz

h3. A6T

h4. X50R

Detected as an F5 model, but works fine.

See Issue #8 for more details, including a document with the generated ACPI events.

Also has information on kernel configuration if backlight isn't working.

h3. V1J

Brightness keys does not work under Linux without custom DSDT. I needed to comment few lines. Second way to do that (I did not test it) is probably to set os name from bootloader with acpi_osi=Linux

h3. UL30A-QX328V

Requires patch in issue http://dev.iksaif.net/issues/108 to enable wwan and wimax rf switches.